New 4105 Compact Utility Tractor

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere4105 Compact Utility Tractor

Add Model --Please Select-- L3400 DT, HST L4400 DT, HST Boomer 3040

Add Model --Please Select-- L3400 DT, HST L4400 DT, HST Boomer 3040

Family	CYDXL1.50K3T or DYDXL1.50L3T or EYDXL1.50L3T or FYDXL1.50L3T
Manufacturer	Yanmar
Engine model
Engine power (gross)	30.2 kW 41 hp 97/68/EC rated power
Power take-off (PTO) power	24.2 kW 32.5 hp
Rated engine speed	2800 rpm
Type	Diesel
Injection pump type	In-line with electric shutoff
Aspiration	Turbocharged
Emissions compliance	Tier 4 Interim or Final Tier 4
Cylinders/displacement	3 / 1.496 L 3 / 91.3 cu in.
Number of cylinders	Three
Cylinder liners	Cast-in-block
Bore and stroke	84 x 90 mm 3.3 x 3.54 in.
Compression ratio	19.0:1
Lubrication	Pressurized
Cooling system	Water pump
Air cleaner	Dual element with electronic restriction indicator
Engine torque at rated speed	80.3 Nm 59.2 lb-ft
Fuel tank capacity	39.7 L 10.5 U.S. gal.

Battery size	500 CCA
Alternator (12-V)	40 amp
Starter size	1.4 kW 1.9 hp

Type	Direct injection
Fuel consumption	8.9 L/hr 2.35 U.S. gal./hr

Standard transmission; forward/reverse	Hydro, 2-Range
Optional transmission; forward/reverse
Left-hand reverser	No
Transmission gear ranges
Final drive	Planetary
Brakes	Wet disk
Steering	Power steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacity	Front 720-1450 kg 1587-3197 lbRear 1815 kg 4000 lb
Creeper	No
Cruise control	Optional
Differential lock	Yes
Drawbar maximum vertical load

Type	Open Center
Pump rated output	Steering 21.6 L/min 5.7 gpmImplement 34.7 L/min 9.2 gpm 56.2 L/min 14.8 gpm
Pump type	Dual gear
Maximum operating pressure	2500 psi
Draft control sensing	Position control
Remote control valves available	2

Category	Category 1
Lift capacity, 24-in. behind link arms	999 kg 2200 lb

Standard	Rear @ 540 rpm
Optional
Control	Independent
Clutch	Wet disk
Brake (for mid and rear PTO)	N/A
Engagement method

Crankcase with filter	4.3 L 4.5 qt
Transmission and hydraulic system	25.7 L 6.8 U.S. gal.

Type	Planetary
Differential lock	Yes

Rollover protective structure	Type Rigid ASAE S478
Platform - flat/straddle	Semi-flat
Gear shift location - console/floor	Left Side

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Wheelbase	1727 mm 68 in.
Front axle clearance	373 mm 14.7 in.
Turning radius with brakes
Turning radius without brakes	2.89 m 9.5 ft
Limited slip differential
Approximate shipping weight (open-station; cab)	1355 kg 2987 lb

Front	10-16.5 R4 / 8-16 R1 - MFWD
Rear	17.5L-24 R4 / 14.9-24 R1 - MFWD
Front tread range
Rear tread spacing

Toolbox
Tilt steering wheel
12-V Outlet